Click image to view full size image
Overview
Applying the principle of aerodynamics and under the interaction op positive and negative pressure, light and small fraction (plastics, paper etc.) are segregated from the screened material. Light materials are conveyed to material segregator through pipe, which will segregate separated material from air. Light materials will directly fall into the feeder of subsequent equipment.
The air volume and air pressure of the fan can be adjusted. Ventilating and conveying pipe is made of galvanized plates. One the pipe, valves are installed to adjust wind volume. The length and installation of the pipe depends on the practical situation on the site.
Scope of Application
- Sort forepart material of MSW for RDF preparation process.
- Sort light impurities or fraction for metal recycling, i.e. plastic vs aluminum/copper
- Construction waste sorting
Technical Parameter
On Site Demonstration:
JONO has professional material testing system to test and analyze every target material of every project, and hence provides the best equipment type for our customers.
Contact:
JONO Recycling Technology (Suzhou) Co., Ltd.
Address: No. 558, Longqiao Road, Wujiang Economic and Technological Development Zone, Suzhou, Jiangsu Province, China
Mr. Jack Wang
Cell: +86 138 0188 9163
FAX: +86 512 8666 8089
Applying the principle of aerodynamics and under the interaction op positive and negative pressure, light and small fraction (plastics, paper etc.) are segregated from the screened material. Light materials are conveyed to material segregator through pipe, which will segregate separated material from air. Light materials will directly fall into the feeder of subsequent equipment.
The air volume and air pressure of the fan can be adjusted. Ventilating and conveying pipe is made of galvanized plates. One the pipe, valves are installed to adjust wind volume. The length and installation of the pipe depends on the practical situation on the site.
Scope of Application
- Sort forepart material of MSW for RDF preparation process.
- Sort light impurities or fraction for metal recycling, i.e. plastic vs aluminum/copper
- Construction waste sorting
Technical Parameter
| Model Name | Dimension LxWxH (mm) |
Throughput (t/h) |
Amount of Air (m3/h) | Total Presure (Pa) | Driving Power (kW) |
| 1FFX650A | 9,000x2,300x3,500 | 10-15 t/h | 13,000-30,000 | 1000-2000 | 15 |
On Site Demonstration:
JONO has professional material testing system to test and analyze every target material of every project, and hence provides the best equipment type for our customers.
Contact:
JONO Recycling Technology (Suzhou) Co., Ltd.
Address: No. 558, Longqiao Road, Wujiang Economic and Technological Development Zone, Suzhou, Jiangsu Province, China
Mr. Jack Wang
Cell: +86 138 0188 9163
FAX: +86 512 8666 8089